Data Acquisition Toolbox
连接到数据采集卡,设备和模块
数据采集工具箱™提供用于配置数据采集硬件的应用程序和功能,将数据读入MATLAB®和模拟万博1manbetx®,并将数据写入DAQ模拟和数字输出通道。工具箱支持各种DAQ硬件万博1manbetx,包括USB,PCI,PCI Express®,pxi.®和pxi表达®来自国家仪器的设备®和其他供应商。
The toolbox apps let you interactively configure and run a data acquisition session. You can then generate equivalent MATLAB code to automate your acquisition in future sessions. Toolbox functions give you the flexibility to control the analog input, analog output, counter/timer, and digital I/O subsystems of a DAQ device. You can access device-specific features and synchronize data acquired from multiple devices.
You can analyze data as you acquire it or save it for post-processing. You can also automate tests and make iterative updates to your test setup based on analysis results.
开始:
模拟输入记录器应用程序
Configure device channels, preview signals, and record analog input data in the foreground or background.
模拟输出生成器应用程序
配置设备通道,定义和预览信号,并在前台或背景中生成模拟输出信号。
信号分析仪App
在时间,频率和时频域中可视化,测量,分析和比较信号信号处理工具箱™.
Multichannel Audio
使用一个或多个通道获取和生成音频信号。
National Instruments
从NI-DAQMX设备获取和分析数据,包括CompactDAQ,X系列,M系列,E系列,USB,MyDAQ,ELVIS II等。
测量计算和数据转换
Acquire and analyze data from Measurement Computing™ and Data Translation®DAQ devices, or write an adaptor for another DAQ vendor.
教育DAQ硬件
探索模拟电路设计,用DigiLent等低成本平台®Analog Discovery 2™ and Analog Devices®ADALM1000 Active Learning Module.
Sound and Vibration
从IEPE测量声压和加速度microphones and IEPE accelerometers. Record data in physical units such as pascals and gravities.
应变,压力和力
Measure strain, pressure, and force from strain bridges, load cells, and other sensors and transducers.
Temperature
Measure temperature from thermocouples and resistive temperature devices (RTDs) in physical units such as degrees Celsius.
Counter and Timer Subsystems
获得正交编码器位置,计数边缘,测量频率和脉冲宽度,并产生脉冲。
Analog Voltage Subsystems
在DAQ设备的模拟输入和模拟输出通道上获取和生成电压信号。
Analog Current Subsystems
Acquire and generate current signals on analog input and analog output channels of your DAQ device.
Triggers and Shared Scan Clocks
Simultaneously generate and acquire analog data. Synchronize data acquisition and generation.
新的命令行界面
使用简化的界面发现硬件并启动前景和背景数据采集
模拟输出生成器应用程序
将数据写入DAQ设备上的模拟输出通道
App Support for Measurement Computing Hardware
Acquire and send data from Measurement Computing hardware using Analog Input Recorder and Analog Output Generator apps
See therelease notesfor details on any of these features and corresponding functions.