Use the LTE Toolbox™ to create a frame worth of data, pass it through a fading channel and perform channel estimation and equalization. Two figures are created illustrating the received and equalized frame.

使用LTE Toolbox™软件完全同步，解码和解码Live EnodeB信号。在用户设备（UE）可以与网络通信之前，它必须执行单元格搜索和选择过程，然后获得初始系统信息。此过程涉及获取插槽和框架同步，确定单元格身份并解码MIB和系统信息块（SIB）。此示例演示了此过程，并解码了MIB和SIB1，这是系统信息块的第一个。解码MIB和SIB1需要一个全面的，能够解调和解码大多数下行链路通道和信号。

How the LTE Toolbox™ can be used to fully synchronize, demodulate and decode a live narrowband internet of things (NB-IoT) downlink signal. Before the user equipment (UE) can communicate with the network, it must perform cell search and selection procedures and obtain initial system information. This involves acquiring slot and frame synchronization, finding out the cell identity and decoding the MIB. This example demonstrates this process and decodes the MIB. To decode MIB a comprehensive receiver is required, capable of demodulating and decoding the downlink channels and signals.

Capture and decode an LTE signal obtained either from a file or from radio by using LTE Toolbox™ software and various hardware support packages (HSPs). Before the user equipment (UE) can communicate with the network, it must perform cell search and selection procedures, and then obtain initial system information. This process involves acquiring slot and frame synchronization, determining the cell identity, and decoding the MIB and system information blocks (SIBs). This example launches a graphical user interface (GUI), which enables you to: Provide all the inputs for scanning LTE waveforms

How LTE Toolbox™ can be used to detect the presence of UEs associated with an eNodeB. This is achieved by searching a downlink signal for DCI messages and establishing the set of unique identifiers (C-RNTIs) in use.