Statistics
MATLAB Answers
0質問
81回答
ランク
579
of 262,336
評価
108
貢献
0質問
81回答
回答採用率
0.00%
獲得投票数
21
ランク
of 113,375
貢献
0問題
0解答
スコア
0
バッジ数
0
貢献
0 投稿
貢献
0パブリック チャネル
平均評価
貢献
0Highlights
AVERAGE NO. OF LIKES
10 of your answers have been accepted
Awarded to Stefanie Schwarz on 15 Feb 2022
Accept 20 answers given by other contributors
Awarded to Stefanie Schwarz on 12 Nov 2021
Answer 10 questions that were unanswered for more than 30 days
Awarded to Stefanie Schwarz on 03 Jun 2020
Publish your first review
Awarded to Stefanie Schwarz on 28 Oct 2019
3 of your answers have been accepted
Awarded to Stefanie Schwarz on 05 Jul 2019
Contribute at least one answer each month for 6 consecutive months
Awarded to Stefanie Schwarz on 06 Nov 2018
Provide your first answer ever to someone else's question
Awarded to Stefanie Schwarz on 28 Sep 2017
Content Feed
回答済み
No driver block was generated for port(s) mapped to interface "LEDs General Purpose" in the software interface model. error occurred
Hi Praveen, The message that you mention should merely be a note (not an error) that no driver blocks are generated for the sof...
No driver block was generated for port(s) mapped to interface "LEDs General Purpose" in the software interface model. error occurred
Hi Praveen, The message that you mention should merely be a note (not an error) that no driver blocks are generated for the sof...
15日 前 | 0
回答済み
Can I download older versions of MCR?
Please also see: How do I install older update versions of MATLAB Compiler Runtime (MCR)? Can I obtain versions of MCR that ar...
Can I download older versions of MCR?
Please also see: How do I install older update versions of MATLAB Compiler Runtime (MCR)? Can I obtain versions of MCR that ar...
約1ヶ月 前 | 0
回答済み
Problem with the Connecttion between Zybo Z7 20 and Matlab
The MathWorks Zynq Workflow does not support ZYBO Z7-20 out of the box. The Linux image that you downloaded at the time was desi...
Problem with the Connecttion between Zybo Z7 20 and Matlab
The MathWorks Zynq Workflow does not support ZYBO Z7-20 out of the box. The Linux image that you downloaded at the time was desi...
約1ヶ月 前 | 0
回答済み
Blackbox Interface : Task "Build FPGA Bitstream" unsuccessful
To avoid this error message, try to specify the external source code as "Additional source files" in HDL Workflow Advisor. When ...
Blackbox Interface : Task "Build FPGA Bitstream" unsuccessful
To avoid this error message, try to specify the external source code as "Additional source files" in HDL Workflow Advisor. When ...
5ヶ月 前 | 0
回答済み
Simulink Real-Time Build Error: Undefined identifier xPCLoadParamSetFile in xpcoptions.tlc
From what we know, this is an error that only appears after installing Speedgoat I/O Blockset. To prove this, run the following ...
Simulink Real-Time Build Error: Undefined identifier xPCLoadParamSetFile in xpcoptions.tlc
From what we know, this is an error that only appears after installing Speedgoat I/O Blockset. To prove this, run the following ...
6ヶ月 前 | 0
回答済み
Error in importhdl how to solve?
Here is a list of supported constructs with importdhl: //www.tianjin-qmedu.com/help/hdlcoder/ug/supported-verilog-constructs-...
Error in importhdl how to solve?
Here is a list of supported constructs with importdhl: //www.tianjin-qmedu.com/help/hdlcoder/ug/supported-verilog-constructs-...
7ヶ月 前 | 0
|採用済み
回答済み
Problem with Windows Management Instrumentation while compiling a DSpace program with a FPGA card (RTI Build Error)
The issue appears to with either Xilinx System Generator or dSPACE RTI. These tools are external to MathWorks. You may want to ...
Problem with Windows Management Instrumentation while compiling a DSpace program with a FPGA card (RTI Build Error)
The issue appears to with either Xilinx System Generator or dSPACE RTI. These tools are external to MathWorks. You may want to ...
7ヶ月 前 | 0
回答済み
Efficiently update MATLAB App Designer GUI real time from Simulink
See also the following MATLAB Answers post for more up-to-date info: //www.tianjin-qmedu.com/matlabcentral/answers/517628-how...
Efficiently update MATLAB App Designer GUI real time from Simulink
See also the following MATLAB Answers post for more up-to-date info: //www.tianjin-qmedu.com/matlabcentral/answers/517628-how...
8ヶ月 前 | 0
回答済み
Simulink engine interface is not enabled.
This is probably due to a licensing problem. Please see the following answer: //www.tianjin-qmedu.com/matlabcentral/answers/1...
Simulink engine interface is not enabled.
This is probably due to a licensing problem. Please see the following answer: //www.tianjin-qmedu.com/matlabcentral/answers/1...
8ヶ月 前 | 0
回答済み
Simulink Engine Interface is not enabled
I suspect that this might be a licensing problem. For example, it could be that a network license key is unavailable. See also: ...
Simulink Engine Interface is not enabled
I suspect that this might be a licensing problem. For example, it could be that a network license key is unavailable. See also: ...
8ヶ月 前 | 0
|採用済み
回答済み
Index exceeds array bounds when trying to configure USRP Support Package
We assume that you are receiving this error message while trying to set up the USRP Radio using the Hardware Setup GUI. The erro...
Index exceeds array bounds when trying to configure USRP Support Package
We assume that you are receiving this error message while trying to set up the USRP Radio using the Hardware Setup GUI. The erro...
9ヶ月 前 | 0
回答済み
How to run a code only up to a certain line?
Starting in R2021b, with our improved editor, there is also a new "Run to here" feature to run the code until to a certain line ...
How to run a code only up to a certain line?
Starting in R2021b, with our improved editor, there is also a new "Run to here" feature to run the code until to a certain line ...
9ヶ月 前 | 0
回答済み
Simulink Real-Time API for Microsoft .NET Framework @ 2020b
See also the following MATLAB Answers post: //www.tianjin-qmedu.com/matlabcentral/answers/1459179-can-i-use-xpcapi-dll-or-xpc...
Simulink Real-Time API for Microsoft .NET Framework @ 2020b
See also the following MATLAB Answers post: //www.tianjin-qmedu.com/matlabcentral/answers/1459179-can-i-use-xpcapi-dll-or-xpc...
10ヶ月 前 | 0
回答済み
SoC Builder: 'loading existing binaries' workflow fails with error: "Selected folder does not contain project information files"
Even if you would like to use the pregenerated bitstream, you need to follow all the steps in the example. This means that you h...
SoC Builder: 'loading existing binaries' workflow fails with error: "Selected folder does not contain project information files"
Even if you would like to use the pregenerated bitstream, you need to follow all the steps in the example. This means that you h...
10ヶ月 前 | 0
回答済み
EtherCAT master in Simulink Desktop Real-Time
The short answer is no. Simulink Real-Time (SLRT) and Simulink Desktop Real-Time (SLDRT) are fundamentally different products an...
EtherCAT master in Simulink Desktop Real-Time
The short answer is no. Simulink Real-Time (SLRT) and Simulink Desktop Real-Time (SLDRT) are fundamentally different products an...
10ヶ月 前 | 0
回答済み
why this error "Unable to check out the Simulink Coder license which is required to generate code"?
See the following answer to troubleshoot license and installation issues with our Coder products: //www.tianjin-qmedu.com/mat...
why this error "Unable to check out the Simulink Coder license which is required to generate code"?
See the following answer to troubleshoot license and installation issues with our Coder products: //www.tianjin-qmedu.com/mat...
10ヶ月 前 | 0
回答済み
Setup : FPGA in LOOP
The Xilinx tool edition that you need to install will most likely depend on the FPGA that you would like to use. See also: http...
Setup : FPGA in LOOP
The Xilinx tool edition that you need to install will most likely depend on the FPGA that you would like to use. See also: http...
10ヶ月 前 | 0
回答済み
What is the roadmap to updating MATLAB to use HDF5 1.10 or later?
We support HDF5 1.10.7 starting from release 2021b. See the release notes: //www.tianjin-qmedu.com/help/releases/R2021b/matla...
What is the roadmap to updating MATLAB to use HDF5 1.10 or later?
We support HDF5 1.10.7 starting from release 2021b. See the release notes: //www.tianjin-qmedu.com/help/releases/R2021b/matla...
10ヶ月 前 | 0
|採用済み
回答済み
Does the 2020a version allow using the deploy function for deep learning models on macOS?
According to this documentation page, we don't support deployment of deep learning applications from Mac to Raspi as of R2021b: ...
Does the 2020a version allow using the deploy function for deep learning models on macOS?
According to this documentation page, we don't support deployment of deep learning applications from Mac to Raspi as of R2021b: ...
10ヶ月 前 | 0
回答済み
How to deploy a matlab function to raspberry pi 3b+
According to this documentation page, we don't currently support deployment of deep learning networks from Mac to Raspi: https:...
How to deploy a matlab function to raspberry pi 3b+
According to this documentation page, we don't currently support deployment of deep learning networks from Mac to Raspi: https:...
10ヶ月 前 | 0
回答済み
In 2018b MATLAB version, Can SIMULINK files (.slx) be converted into Standalone applications(.exe)?
Please see the following answer. The recommended workflow is to upgrade MATLAB to R2020a or later and use Simulink Compiler: ht...
In 2018b MATLAB version, Can SIMULINK files (.slx) be converted into Standalone applications(.exe)?
Please see the following answer. The recommended workflow is to upgrade MATLAB to R2020a or later and use Simulink Compiler: ht...
10ヶ月 前 | 0
回答済み
Using Raspberry Pi as Hardware for Vehicle Network Toolbox
Starting from R2021b, you can use the MATLAB Support Package for Raspberry Pi Hardware to read and write CAN messages from the C...
Using Raspberry Pi as Hardware for Vehicle Network Toolbox
Starting from R2021b, you can use the MATLAB Support Package for Raspberry Pi Hardware to read and write CAN messages from the C...
10ヶ月 前 | 0
回答済み
Standalone executable of Simulink Desktop Real Time model
No, it is currently not possible to run a Simulink Desktop Real-Time simulation as standalone executable. Depending on the hard...
Standalone executable of Simulink Desktop Real Time model
No, it is currently not possible to run a Simulink Desktop Real-Time simulation as standalone executable. Depending on the hard...
10ヶ月 前 | 0
回答済み
About the difference between Normal Mode and External Mode of Simulink Desktop Real-Time.
Please see the following post: //www.tianjin-qmedu.com/matlabcentral/answers/536647-what-are-the-differences-between-normal-a...
About the difference between Normal Mode and External Mode of Simulink Desktop Real-Time.
Please see the following post: //www.tianjin-qmedu.com/matlabcentral/answers/536647-what-are-the-differences-between-normal-a...
11ヶ月 前 | 0
回答済み
Memory section default configuration
You see this warning because starting from R2018a, the correct way to define default memory sections is using the Code Mappings ...
Memory section default configuration
You see this warning because starting from R2018a, the correct way to define default memory sections is using the Code Mappings ...
11ヶ月 前 | 0
回答済み
What is the difference between MATLAB Web App Server (R2020a new toolbox) and MATLAB Web App Server (in matlab compiler)?
You can also see the following doc page for more details regarding the differences: //www.tianjin-qmedu.com/help/compiler/web...
What is the difference between MATLAB Web App Server (R2020a new toolbox) and MATLAB Web App Server (in matlab compiler)?
You can also see the following doc page for more details regarding the differences: //www.tianjin-qmedu.com/help/compiler/web...
約1年 前 | 0
回答済み
Worst Case execution time analysis for Simulink Blocks
Worst Case Execution Time is not yet a feature provided by MathWorks products. However, our development team is aware of this us...
Worst Case execution time analysis for Simulink Blocks
Worst Case Execution Time is not yet a feature provided by MathWorks products. However, our development team is aware of this us...
1年以上 前 | 0
回答済み
using forecast in combination with nlarx gives an error
The error message is caused by the variable "forecast=6" in your code that shadows the "forecast" function. Please rename the va...
using forecast in combination with nlarx gives an error
The error message is caused by the variable "forecast=6" in your code that shadows the "forecast" function. Please rename the va...
1年以上 前 | 0
|採用済み
回答済み
Can I disable update notifications
Unfortunately, there is currently no way to turn off these Update Notifications, but we might consider adding such an option in ...
Can I disable update notifications
Unfortunately, there is currently no way to turn off these Update Notifications, but we might consider adding such an option in ...
1年以上 前 | 0
回答済み
Matlab standalone application running on Raspberry Pi or Xilinx Zynq-7020
You will need Embedded Coder to create C/C++ from your MATLAB code or Simulink model, so that you can build "real" standalone ex...
Matlab standalone application running on Raspberry Pi or Xilinx Zynq-7020
You will need Embedded Coder to create C/C++ from your MATLAB code or Simulink model, so that you can build "real" standalone ex...
1年以上 前 | 0
You can also select a web site from the following list:
Americas
- América Latina(Español)
- Canada(English)
- United States(English)
Europe
- Belgium(English)
- Denmark(English)
- Deutschland(Deutsch)
- España(Español)
- Finland(English)
- France(Français)
- Ireland(English)
- Italia(Italiano)
- Luxembourg(English)
- Netherlands(English)
- Norway(English)
- Österreich(Deutsch)
- Portugal(English)
- Sweden(English)
- Switzerland
- United Kingdom(English)
Asia Pacific
- Australia(English)
- India(English)
- New Zealand(English)
- 中国
- 日本Japanese(日本語)
- 한국Korean(한국어)