Urmila Rajpurohith
MathWorks
我是MathWorks的技术支万博1manbetx持工程师。我的兴趣领域是嵌入式系统和
信号处理。
免责声明：这里的任何建议或意见是我自己的，绝不相关的数学作业。
Statistics
Matlab答案
0Questions
148Answers
RANK
of 108,567
CONTRIBUTIONS
0Problems
0万博 尤文图斯
SCORE
0
徽章数量
0
CONTRIBUTIONS
0帖子
CONTRIBUTIONS
0公共渠道
AVERAGE RATING
CONTRIBUTIONS
0Highlights
平均没有。喜欢
Contribute at least one answer each month for 6 consecutive months
在2020年9月2日授予Urmila Rajpurohith
回答10个未答复超过30天的问题
2020年4月7日授予Urmila Rajpurohith
为别人的问题提供你的第一个答案
于2019年8月2日授予Urmila Rajpurohith
内容饲料
回答
为Xilinx Zynq平台配置HDL编码器
嗨，Matlab R2021A中不存在问题，将MATLAB升级到最新的Realeeae i.e.R2021A可能解决问题。
为Xilinx Zynq平台配置HDL编码器
嗨，Matlab R2021A中不存在问题，将MATLAB升级到最新的Realeeae i.e.R2021A可能解决问题。
11 months ago | 0
回答
许可证管理器错误-39
Hi If you are still experiencing this issue, please contact MathWorks support //www.tianjin-qmedu.com/support/contact_us/...
许可证管理器错误-39
Hi If you are still experiencing this issue, please contact MathWorks support //www.tianjin-qmedu.com/support/contact_us/...
11 months ago | 0
回答
MATLAB功能块的生成的C / C ++代码在哪里？
Hi When you generate code for a MATLAB function block you will notice that a folder named "slprj" folder in the current direct...
MATLAB功能块的生成的C / C ++代码在哪里？
Hi When you generate code for a MATLAB function block you will notice that a folder named "slprj" folder in the current direct...
11 months ago | 0
回答
UNSUCCESSFULL阅读：MATLAB-ARDUINO蓝牙通信通过HC-05设备
Hi The initialization process on the Arduino board takes a few seconds. "fopen" does not wait until the initialization process ...
UNSUCCESSFULL阅读：MATLAB-ARDUINO蓝牙通信通过HC-05设备
Hi The initialization process on the Arduino board takes a few seconds. "fopen" does not wait until the initialization process ...
12 months ago | 0
回答
Arduino第三方软件无法在Matlab 2019B版本5上安装
Hi you can refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/589168-wh...
Arduino第三方软件无法在Matlab 2019B版本5上安装
Hi you can refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/589168-wh...
1年前| 0
回答
webread error: Malformed message: Field value too long/no CRLF found
嗨此问题在R2019B中得到解决，您可以尝试将MATLAB升级到R2019B或以后的realse。
webread error: Malformed message: Field value too long/no CRLF found
嗨此问题在R2019B中得到解决，您可以尝试将MATLAB升级到R2019B或以后的realse。
1年前| 0
|公认
回答
安装MATLAB for Arduino硬件问题：“无法下载第三方软件：adafruit bno055传感器库”
Hi you can refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/589168-wh...
安装MATLAB for Arduino硬件问题：“无法下载第三方软件：adafruit bno055传感器库”
Hi you can refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/589168-wh...
1年前| 0
回答
Download problem for different versions of Matlab
Hi Try the following steps to resolve the issue: This error can be caused by an anti-virus or security program interfering wi...
Download problem for different versions of Matlab
Hi Try the following steps to resolve the issue: This error can be caused by an anti-virus or security program interfering wi...
1年前| 0
回答
使用FIK和下载安装程序安装时出错
Hi Refer to the below link which answers a similar question //www.tianjin-qmedu.com/matlabcentral/answers/98390-why-do-i-see...
使用FIK和下载安装程序安装时出错
Hi Refer to the below link which answers a similar question //www.tianjin-qmedu.com/matlabcentral/answers/98390-why-do-i-see...
1年前| 0
回答
Simulink R2020B中错过了“代码生成存储类”的块设置万博1manbetx
Hi Currently these parameters can be achieved as follows: 1. Instead of accessing "Signal object class", it is possible to u...
Simulink R2020B中错过了“代码生成存储类”的块设置万博1manbetx
Hi Currently these parameters can be achieved as follows: 1. Instead of accessing "Signal object class", it is possible to u...
1年前| 0
|公认
回答
Matlab Arduino：使用Matlab中的定时器函数来查找频率
嗨，请参阅以下链接，回答类似的问题：https：//www.tianjin-qmedu.com/matlabcentral/answers/495469-how-to -s ...
Matlab Arduino：使用Matlab中的定时器函数来查找频率
嗨，请参阅以下链接，回答类似的问题：https：//www.tianjin-qmedu.com/matlabcentral/answers/495469-how-to -s ...
1年前| 0
回答
automatic naming for simulink blocks
Hi Refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/445974-increment-...
automatic naming for simulink blocks
Hi Refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/445974-increment-...
1年前| 0
回答
Raspberry safe shutdown button
嗨Eexecuting以下命令表单MATLAB命令窗口将解决问题：H = RASPBERTYPI H.EXECUTE（'sudo shutdown -h ...
Raspberry safe shutdown button
嗨Eexecuting以下命令表单MATLAB命令窗口将解决问题：H = RASPBERTYPI H.EXECUTE（'sudo shutdown -h ...
1年前| 1
回答
Derivative of state '1' in block 'sunho/Inverse Dynamic/Integrator' at time is not finite.
Hi You can try changing the solver to Variable-step ode15s (stiff/NDF). Or refer the following link to resolve the issue : ...
Derivative of state '1' in block 'sunho/Inverse Dynamic/Integrator' at time is not finite.
Hi You can try changing the solver to Variable-step ode15s (stiff/NDF). Or refer the following link to resolve the issue : ...
1年前| 0
回答
如何使用IMDistline测量Y Axys中的距离？
Hi Refer to the below documentation on "imdistline" which gives more detailed information : //www.tianjin-qmedu.com/help/ima...
如何使用IMDistline测量Y Axys中的距离？
Hi Refer to the below documentation on "imdistline" which gives more detailed information : //www.tianjin-qmedu.com/help/ima...
1年前| 0
回答
While installing "SoC Blockset Support Package for Xilinx Devices" I have the following outcome.
嗨尝试重新安装支持包。万博1manbetx有关更多详细信息：SoC Blockset支持Packa ...万博1manbetx
While installing "SoC Blockset Support Package for Xilinx Devices" I have the following outcome.
嗨尝试重新安装支持包。万博1manbetx有关更多详细信息：SoC Blockset支持Packa ...万博1manbetx
1年前| 0
|公认
回答
How can a video input object be used to acquire images as rapidly as the preview function
Hi Try using "VideoReader" for reading and previewing pre recorded mp4 file. I am attaching a snippet from the documentation th...
How can a video input object be used to acquire images as rapidly as the preview function
Hi Try using "VideoReader" for reading and previewing pre recorded mp4 file. I am attaching a snippet from the documentation th...
1年前| 0
回答
Simulink model opening problem
Hi Refer to the below link which answers a similar question: Can I open a file with different versions of Matlab? - MATLAB Ans...
Simulink model opening problem
Hi Refer to the below link which answers a similar question: Can I open a file with different versions of Matlab? - MATLAB Ans...
1年前| 0
|公认
回答
如何查看或更改此模型中使用的驾驶循环
Hi You can switch the different driving cycles. If you want to create the driving cycles, "Drive Cycle Source" will help you. ...
如何查看或更改此模型中使用的驾驶循环
Hi You can switch the different driving cycles. If you want to create the driving cycles, "Drive Cycle Source" will help you. ...
1年前| 0
|公认
回答
万博1manbetxSimulink滑块在调整后消失
Hi It's a known issue and our developers are aware about it and will try to fix it in future releases.
万博1manbetxSimulink滑块在调整后消失
Hi It's a known issue and our developers are aware about it and will try to fix it in future releases.
1年前| 1
|公认
回答
raspberry pi zero w不与simulink硬件设置连接万博1manbetx
Hi One possible reason for this is, the OS fails to detect Remote Network Driver Interface Specification (RNDIS) driver . Insta...
raspberry pi zero w不与simulink硬件设置连接万博1manbetx
Hi One possible reason for this is, the OS fails to detect Remote Network Driver Interface Specification (RNDIS) driver . Insta...
1年前| 0
回答
Call to autosar_make_rtw_hook ended with error
Hi It might be because XML Options are configured such that Application Data Types and Data Types are pointing to the same loca...
Call to autosar_make_rtw_hook ended with error
Hi It might be because XML Options are configured such that Application Data Types and Data Types are pointing to the same loca...
1年前| 0
回答
Unable to load help page in MATLAB
Hi Refer to the below link which may help you in resolving the issue: //www.tianjin-qmedu.com/matlabcentral/answers/423210-w...
Unable to load help page in MATLAB
Hi Refer to the below link which may help you in resolving the issue: //www.tianjin-qmedu.com/matlabcentral/answers/423210-w...
1年前| 0
回答
Trying to update to R2019b Update 1
嗨，请参阅以下链接，为“Online Update Installer”和“脱机更新安装程序”HTTPS：//In.Mathw ...
Trying to update to R2019b Update 1
嗨，请参阅以下链接，为“Online Update Installer”和“脱机更新安装程序”HTTPS：//In.Mathw ...
1年前| 0
回答
VideoReader Error: Unable to initialize the video properties on Debian 10
Hi The reason is that old versions of MATLAB used to rely on gstreamer-0.10 to process video but from at least R2017a the depen...
VideoReader Error: Unable to initialize the video properties on Debian 10
Hi The reason is that old versions of MATLAB used to rely on gstreamer-0.10 to process video but from at least R2017a the depen...
1年前| 0
回答
video processing in Matlab
Hi Refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/344433-video-proc...
video processing in Matlab
Hi Refer to the below link which answers a similar question: //www.tianjin-qmedu.com/matlabcentral/answers/344433-video-proc...
1年前| 0
回答
万博1manbetxSimulink 2020b打开“配置参数”速度慢！
Hi By default MATLAB tries 'opengl hardware' on the machine, and if some reason it detects some incompatibility with graphics d...
万博1manbetxSimulink 2020b打开“配置参数”速度慢！
Hi By default MATLAB tries 'opengl hardware' on the machine, and if some reason it detects some incompatibility with graphics d...
1年前| 0
