MATLAB class and Simulink blocks for communicating with an Arduino microcontroller board

dsPIC, PIC32, SAMx2, SAMx5 and SAMx7 support package

Custom target for Arduino and other processors

This package represents the MATLAB Installer add-on for the FREE of cost, NXP’s Model-Based Design Toolboxes.

Interface with HC-SR04 ultrasonic sensors connected to Arduino hardware in MATLAB.

Program a Data Logging Shield using the S-Function Builder

This app allows a user to interactively configure/control their data acquisition devices.

This is an augmenting block that enables the ArduinoIO package with the I2C bus read capability.

A set of wrapper functions to run FFmpeg directly from Matlab

Board support package for HDL targeting and data streaming from Analog Devices transceivers.

MATLAB工具Driver for use with PicoScope 5000 Series oscilloscopes

Connect to Xilinx UltraScale+ RFSoC gigasample data converters. Perform analysis in MATLAB and Simulink. Deploy algorithms with HDL Coder.

MATLAB工具Driver for use with PicoScope 3000 Series oscilloscopes (Beta release)

This package represents the MATLAB Installer add-on for the FREE of cost, NXP’s Model-Based Design Toolboxes.

Arm Compiler Support Package for Embedded Coder

Arm Cortex-M Fast Models Support Package for Embedded Coder.

Generate optimized code for XMC Microcontrollers

Microsoft Kinect, OpenNI wrapper, Skeleton, Depth

Raspberry Pi SFunction to obtain MPU6050 data using the C-library WiringPiI2C.

Support for low cost Texas Instruments LaunchPads

Examples showing how to run MATLAB code on Raspberry Pi Hardware.

MATLAB工具Driver for use with PicoScope 2000 Series Oscilloscopes and MSOs (Beta Release)

Connect wirelessly to a BITalino from MATLAB to acquire and analyze medical signals

Board support package for HDL targeting and data streaming from Analog Devices transceivers.

Communicate with 1-Wire devices connected to Arduino hardware in MATLAB

Simulink (Embedded Coder) Target for TI Stellaris LaunchPad

MATLAB工具Driver for use with PicoScope 4000 Series oscilloscopes (Beta Release)

Thsi目标支持包允许你万博1manbetx部署your algorithms on TI LaunchPad.

Toolbox for controlling LEGO^®MINDSTORMS^®NXT robots via a Bluetooth or USB connection.

MATLAB工具Driver for use with PicoScope 2000 Series oscilloscopes (Beta Release)

Blockset for the simulation and Wi-Fi control of the Parrot ARDrone 2.0. Simulate, connect, and fly!

Driver blocks allowing Simulink models to interface with PWM, MCP3008/ADS1115 ADC, MCP4725 DAC

Development of Simulink Device Driver Blocks for the BeagleBone Black

Deploy MATLAB Simulink model automatically to Parrot AR Drone with Embedded Coder C code generation

The library block SHT1x reads the relative humidity [%] and temperature [°C] from a SHT1x Sensor

Board support packages for ADI transceivers

A library of blocks to get started with the Zumo Robot

MATLAB工具Driver for use with PicoScope 6000 Series oscilloscopes (Beta Release)

MATLAB工具Driver for use with PicoScope 4000 oscilloscopes (Beta Release)

This is an S Function driver for the MPC4725 I2C Digital to Analog 12 bit converter.

This is a driver for the analog devices ADLX345 triaxial acceleration and an Arduino mega.

Embedded Coder Processor In Loop (PIL) Target for Hercules RM48 MCUs

Simplifies streaming or generating audio in real time.

Tektronix AWG5000 and AWG7000 series instrument driver for MATLAB

MATLAB instrument driver for using MATLAB with a Tektronix RSA306 Spectrum Analyzer

Motor Shield Driver Blocks

Driver for Arduino Data Logging Shield

Vicon Tracker S Function and Simulink Model Samples

This driver is for the SEN 0140 10 DOF IMU and an Arduino Mega 2560.

DC Motor Driver Block using Soft PWM of WiringPi Library

Using Data Translation Measurement Instruments with MATLAB through IVI-COM

A library of blocks to get started with the Sparkfun RedBot Kit.

This target support package allows you to deploy your algorithms on QNX RTOS.

Basic driver to set variables on scope and read acquired waveforms in MATLAB

This toolbox represents the MATLAB Installer Add-On for the NXP Vision Toolbox for S32V234

Communicate with LSM303 devices connected to Arduino hardware in MATLAB.

Program MiniZed over WiFi using code generation directly from Simulink.

Simple Soft PWM driver block example using WirngPi

Simulink blockset for use with the ArduPilot Mega 2.0 hardware. Includes blocks to read external rad

从MATLAB和Simulink控制一个球面万博1manbetx